Setting up Electronic Invoicing with Storecove

This Help topic explains how to enable the Electronic Invoicing with Storecove feature in Feature Console, and how to complete all additional setup for electronic invoicing.

For an introduction to Certinia's electronic invoicing, including which documents can be sent as electronic invoices, see Electronic Invoicing Overview.

Note: These steps are performed by the org's Administrator.

Feature Step 1: Subscribe to Storecove, set up the Storecove URL as a trusted remote site, and complete the Storecove Integration Settings

You must subscribe to Storecove if you want to use electronic invoicing from Certinia applications. Storecove will send you authentication credentials and URL connection details. When you receive this information you must register the URL as a trusted remote site and complete the Storecove Integration Settings.

Registering the Storecove URL as a Trusted Remote Site

To register Storecove's connection URL as a trusted remote site:

  1. From Setup click Security | Remote Site Settings.
  2. Click New Remote Site.
  3. In the Remote Site Name field, enter a name such as Storecove.
  4. In the Remote Site URL field, enter the URL. Typically this is https://api.storecove.com but enter the URL specified by Storecove.
  5. Select the Active checkbox, then click Save.

Completing the Storecove Integration Settings

When you have set up the trusted remote site, you must complete the Storecove Integration Settings. These settings are configured using the FDN Storecove Connection Settings Lightning Web Component which you must add to a Lightning page that is available to a small number of users such as administrators. You can add the component to an existing page or to a new page as explained below:

  • If you already have a suitable lightning page, open it in the Lightning App Builder and add the FDN Storecove Connection Settings Lightning Web Component to the desired location, then save your changes.
  • If you do not already have a suitable lightning page, go to the Lightning App Builder and create a new Lightning page. Add the FDN Storecove Connection Settings Lightning Web Component to the desired location, then save the page and activate it to make it visible to your users. We recommend you assign permissions to this page to administrators only.

For more information about using the Lightning App Builder to create and edit pages, see the Salesforce Help.

To complete the Storecove Integration Settings:

  1. Make sure the FDN Common Concepts Admin - e-Invoicing permission set is assigned to you otherwise you will not be able to edit the settings.
  2. Navigate to the Lightning page that contains the FDN Storecove Connection Settings component. If an error message reports that you do not have access to the Apex class named einv_ConfigurationPageController it is because the FDN Common Concepts Admin - e-Invoicing permission set is not assigned to you.
  3. Select the Enable Sending checkbox.
  4. In the Connection URL field, enter the URL you have created as a remote site setting.
  5. In the API Key field, enter the access key or password that you obtained from Storecove.
  6. Click Save. The connection details are tested and saved if successful.

If the test fails you can deselect the Enable Sending checkbox and click Save to save the current details whilst you resolve the issues. You might also want to deselect Enable Sending if you are not ready for users to start sending electronic invoices via Storecove. However you must have a successful connection and select the Enable Sending checkbox for electronic invoicing to work.

For more information about completing these settings, see Electronic Invoicing Settings.

When you have completed all aspects of feature step 1, click Mark As Done to indicate that it is complete.

Feature Steps 2, 3, and 4

Feature steps 2, 3, and 4 perform the following actions:

  • Feature step 2 adds new E-Invoicing fields to the Account Extension page layout. Perform this step if you have upgraded to this release. You do not need to perform this step for new installations because the fields are on the page layout by default.
  • Feature step 3 creates the FDN Account Extension permission sets if they do not already exist. If the Sales Tax Enhancement feature is enabled in your org, these permission sets will already exist and you must update them manually to include the following field permissions:
    • Update the FDN Account Extension, FDN Account Extension - Delete, and FDN Account Extension - Edit permission sets to include Read and Write access to the three new fields: Do Not Automatically Send E-Invoices, E-Invoicing Address Identifier, and E-Invoicing Address Scheme.
    • Update the FDN Account Extension - Read permission set to include Read access to the three new fields: Do Not Automatically Send E-Invoices, E-Invoicing Address Identifier, and E-Invoicing Address Scheme.

      • For information about how to edit permission sets, see the Salesforce Help.
  • Feature step 4 sets up a scheduled job on the Foundations Setup | Scheduled Jobs tab to poll Storecove for notifications every 3 hours. Activating the job is explained in Next Steps.

Click Perform for each feature step in turn (feature step 2 is required for upgrades only). When a step has completed its Status changes from "Not Done" to "Done".

When you have completed feature steps 1-4, use the Status slider in the Feature section to mark the feature as enabled.

Now complete the Next Steps below.

Next Steps

Additional Setup Within Accounting to Send and Receive Electronic Invoices

You must complete these tasks before users can send Accounting sales invoices and sales credit note as electronic invoices and receive electronic invoices and create payable invoices and payable credit notes:

  • For each Accounting company sending electronic invoices:
    • Register the company or legal entity with Storecove as a sender of electronic invoices.
    • Enter the identifier obtained from Storecove into the Company E-Invoicing Legal Entity Identifier field.
    • Set the E-Invoicing Tax Category to "None" unless advised otherwise by Storecove.
  • If you have upgraded to this release, you must manually add the E-Invoicing Legal Entity Identifier and E-Invoicing Tax Category fields to the Accounting company's page layout.
  • You can receive a payable invoice and payable credit note from a vendor as an electronic invoice:
    • If the Accounting Company that will pay the invoice has a valid E-Invoicing Legal Entity Identifier generated by Storecove.
    • If the vendor's account record has a valid E-Invoicing Address Scheme and E-Invoicing Address Identifier (set via the Account Extension page), a valid Tax Country Code, and an address.
  • Modify the page layouts for the Sales Invoice, and Sales Credit Note objects to include the E-Invoice Delivery Status and E-Invoice Delivery Error fields. Add the Send E-Invoice button to the Salesforce Mobile and Lightning Experience Actions section. Ensure that you have permission to access these fields and the Send E-Invoice button.
  • Modify the page layouts for the Payable Invoice and Payable Credit Note objects to include the E-Invoice Processing Status field. Ensure that you have permission to access the E-Invoice Processing Status field.
Notes:
  • You must add the Send E-Invoice button to the Salesforce Mobile and Lightning Actions section on the sales invoice and sales credit note page layouts assigned to your users. This button is not available for custom input forms.
  • If your users work with sales invoices, sales credit notes, payable invoices, and payable credit notes using custom input forms, add the fields to your custom input forms using Input Form Manager. However, since custom input forms are no longer supported, we recommend that you switch to Lightning Experience.

For more information about:

Complete the Account Extension E-Invoicing Fields

You must complete the E-Invoicing fields on account extension records:

  1. Navigate to the Account Extension tab.
  2. Create an account extension record for each account that you want to send electronic invoices to.
  3. Complete the fields in the Electronic Invoicing section on each account extension record:
    • E-Invoicing Address Scheme - the scheme ID in the format required by Storecove.
    • E-Invoicing Address Identifier - the reference that uniquely identifies the account within the specified scheme.
    Note:

    The Do Not Automatically Send E-Invoices checkbox is for future use. Setting it has no effect.

  4. Assign the appropriate FDN Account Extension permission set to your users. Users intending to send documents as electronic invoices will need the FDN Account Extension - Read permission set.

Activate the Electronic Invoicing Polling Job

You must activate the scheduled job that polls Storecove at regular intervals. To do this:

  1. Make sure the FDN Core - Administrator permission set is assigned to you.
  2. Go to Foundations Setup | Scheduled Jobs.
  3. Find the Electronic Invoicing Polling Job for Storecove in the list of scheduled jobs and click its Scheduled checkbox.
  4. Click Save on the Scheduled Jobs tab.

You will be notified by email if any errors occur when the job runs. Check the logs on the Scheduled Job Run record for more information.

Double-Check the Storecove Integration Settings are Enabled and Valid

Finally, navigate to the Lightning page where you completed the Storecove Integration Settings. Make sure the Enable Sending checkbox is selected, and click Test Connection to verify that the connection details are valid. Save the settings.

For more information about these settings, see Electronic Invoicing Settings.

Feature Step 5

This step allows you to archive sent and received electronic invoices and create libraries in Salesforce Files to store sent and received electronic invoices. For more information, see the Setup information link in the Feature description and Archiving Electronic Invoices.

When you have completed feature step 5, click Mark as Done to indicate that it is complete. If you do not want to proceed with this step, click Skip.

Feature Step 6

This step sets up a scheduled job on the Foundations Setup | Scheduled Jobs tab to automatically send documents as electronic invoices and notify status updates for received electronic invoices. Using this feature step, you can configure either auto-send or auto-receive or both auto-send and receive electronic invoices.

Click Perform to configure the feature or click Skip to skip this step. When this step is completed, its status changes to "Done".